Aluminum — Wave-Edge Rougher
Aggressive roughing with superior chip breaking and reduced cutting forces.
Application material: Aluminum castings, extrusions, forgings; non-ferrous metals
Coating options: Uncoated, ZrN
Series overview
The wave-edge profile breaks chips into manageable sizes and allows higher feed rates on aluminum castings and deep cavities where chip evacuation is critical.
| Model | Diameter (mm) | Flute Length (mm) | Overall Length (mm) | Shank (mm) | Flutes |
|---|---|---|---|---|---|
| TKALE301-3-5004 | 1 | 3.0 | 50 | 4 | 3 |
| TKALE301-4-7504 | 1 | 4.0 | 75 | 4 | 3 |
| TKALE301-5-10004 | 1 | 5.0 | 100 | 4 | 3 |
| TKALE302-6-5004 | 2 | 6.0 | 50 | 4 | 3 |
| TKALE302-8-7504 | 2 | 8.0 | 75 | 4 | 3 |
| TKALE302-10-10004 | 2 | 10.0 | 100 | 4 | 3 |
| TKALE303-9-5004 | 3 | 9.0 | 50 | 4 | 3 |
| TKALE303-12-7504 | 3 | 12.0 | 75 | 4 | 3 |
| TKALE303-15-10004 | 3 | 15.0 | 100 | 4 | 3 |
High-efficiency roughing of aluminum castings and deep pockets.
All specifications are representative. Please confirm exact diameter tolerances, corner radii, coating availability and stock status with sales before placing an order.